BLOA-1550 Erbium Doped Fiber Amplifier
- Introduction
- Parameters
1. With the highest brand of pump laser and USA OFS Erbium Fiber, perfer PC, ACC, ATC control and good ventilation design, ensure the pump laser high reliable work with long life.
2. RS232 and RJ45 provides serial communicaiton and SNMP network management model. Forward LCD provides operating parameters of the machine, machine alarm, optical loss, automatic laser shutdown, protection of laser hazard. All the optical port can be installed in the front panel.
3. Zhuhai Bluemax high-quality, relibility and excellent cost performance products are the ideal choice for system integrators and operators.
4. 1535~1565nm bandwidth, 500~5000mW (26~37dBm) high output, 2RU frame can provide 8~64 optical outputs for choosing.
Performance |
Index |
Supplement |
||||
Min. |
Typ. |
Max. |
||||
Optical characteristic |
Operting Wavelength(λ) |
(nm) |
1535 |
|
1565 |
CATV |
Optical Power Input Range (Pi) |
(dBm) |
-3 |
≥+5 |
+10 |
||
Optical Power Output1) |
(dBm) |
26 |
37 |
2U |
||
Optical Output Port No. |
4 |
16 |
2U, SC/APC, LC/APC |
|||
8 |
32 |
|||||
8 |
32 |
2U, SC/APC, LC/APC |
||||
16 |
64 |
2U, LC/APC |
||||
Optical Power Output/port |
(dBm) |
10 |
22 |
|||
Power Output Difference Value |
(dB) |
-0.5 |
+0.2 |
|||
Adjustable Output Power Range |
(dBm) |
-6 |
0 |
Optional Features |
||
Noise Figure (Pin=0dBm) |
(dB) |
≤5.0 |
||||
Polarization-Dependent Loss (PDL) |
(dB) |
0.3 |
||||
Polarization Dependent Gain (PDG) |
(dB) |
0.4 |
||||
Polarization Mode Dispersion (PMD) |
(ps) |
0.3 |
||||
Input / Output Return Loss |
(dB) |
≥45 |
||||
Input / Output Pump Leakage Power |
(dBm) |
≤-30 |
||||
Noise ratio C/N |
dB |
≥ 52 |
||||
C/CTB |
dB |
≥ 63 |
||||
C/CSO |
dB |
≥ 63 |
||||
Return Loss |
(dB) |
55 |
APC |
|||
General Features |
SNMP Network Management Interface |
RJ45 |
||||
Communication Interface |
RS232 |
|||||
Voltage |
(V) |
90 |
265 |
220VAC |
||
30 |
72 |
-48VDC |
||||
Power Consumption |
(W) |
150 |
||||
Operating Temperature |
(°C) |
-5 |
65 |
|||
Storage temperature |
(°C) |
-40 |
80 |
|||
Operating Relative Humidity |
(%) |
5 |
95 |
|||
Dimension (W)×(D)×(H) |
(mm) |
19×15.4×3.5 |
2R |
Explanation:
This equipment Parameter refer to CY/T143-2000 CATV System Optical Transmitter Modulated and Workstation Network Technical Conditioons and Methods of Measurement for testing. Base on the above methods of measurement, we can get the result as below: optical receiver, 10km standard optical and optical standard transmitters form in a test link, in the specified fonsumption, sets up with 59 sets PAL-D imitte television channel signals in 550MHz frequency rang. Transmits Digital Modulated Signal, the digital modulated signal (8MHz bandwidth) is less than carrier level of analog signal 10dB. The Optical receiver ootput is -1 dBm. Testing the CTB, CSO and C/N in 10dB.