BLR100-114DG Series
- Introduction
- Parameters
·Adopt
international famous brand’s high sensitive PIN optical detector or integrated
optical receiver module to ensure the excellent C/N index. RF amplification
part adopts foreign PHILIPS or low noise gallium arsenide push-pull
amplification module. The output part adopts foreign PHILIPS or low noise
gallium arsenide push-pull amplification module to ensure excellent C/CTB and
C/CSO index.
·Controlled
by optical AGC, when input optical power is -7--+2dBm, output power level, CTB,
CSO remain unchanged.
·Four output
port can export 108dBuV high power signal, each port is amplified by an
isolated power multiplication module and its output power level and output slope
are adjustable.
·Cordwood
design, which can deploy two optical receiving modules, two return optical transmitting
modules and one power module, to promote the reliability and security of the
system.
·Built-in
integrated status monitoring circuit and network management interface which
meet the SCTE HMS and IEC standard to realize distant detection.
·Aluminum waterproof
case, reliable power switch and strict lightningproof system ensure the stable
operation in wild inclement weather.
·Type I and
type II network management optional, convenient for distant detection and maintain.
Forward optical receiving part
ITEM |
UNIT |
PARAMETER |
Receiving Optical Power |
dBm |
-9~+3 |
Optical AGC Control Range |
dBm |
-7~+2 |
Optical Return Loss |
dB |
>45 |
Optical receiving Wavelength |
nm |
1290--1600 |
Optical Connector Type |
|
FC/APC, SC/APC optional |
Fiber Type |
|
Single Module |
|
|
Link Performance |
C/N |
dB |
≥51 |
C/CTB |
dB |
≥65 |
C/CSO |
dB |
≥60 |
|
|
RF Parameter |
Frequency Range |
MHz |
87-862/1000 |
Flatness |
dB |
(87-750/862)±0.75/ (750、860-1000)±1 |
Output Return Loss |
dB |
87-550≥16 550-862、1000≥14 |
Nominal Output Power Level |
dBuV |
108(-7~+2dBm) |
Output Test Port Power Level |
dBuV |
-20 |
Output Port Number |
PCS |
4 |
Output Impedance |
Ω |
75 |
Return optical transmitting part refers to “BTM32XX series return optical transmitting module”
General Parameter
ITEM |
UNIT |
PARAMETER |
Power Voltage |
VAC |
40—95/140-265 |
Operating Temperature |
℃ |
-40~60 |
Storage Temperature |
℃ |
-40~65 |
Relative Humidity |
% |
max 95% non-condensing |
Consumption |
W |
≤80 |
Dimension(Including F Head) |
mm |
430(L)*245(W)*175(H) |