- Introduction
- Parameters
·Adopt international famous brand’s high
sensitive PIN optical detector or integrated optical receiver module.
Amplifiers adopt GaAs with low noise, nonlinear, low distortion and
electric-control temperature compensation to ensure the stability of power
level.
·Low optical power receiving range: -9~+3dBm
·Harmonic return optical transmitting module
with anti-interference and easy-upgrade is used in return transmitting part,
which improves the reliability, security and convenience of the system
·High isolation duplex filter, equilibrium
and attenuation all used 3.175mm width plug design for insert exchangeable
·Four high level output port could reached
more than 110dBuV. Each separate RF output has independent equilibrium and
attenuation adjusting position
·Build-in
integrated monitoring circuit, and HMS standard network interface reserved for
installing additional network transponder to remote monitor
·In the
middle of return part reserved the high and low pass filter plug-in position. The
high pass filter (15MHz-1GHz or user defined) is used for suppressing noise
under 15MHz. Two level low pass filter (5-65MHz or user defined) is used for
suppressing forward signal over 85MHz to prevent return laser overload
·Reliable
power switch starting at -20℃ (-40℃ optional), with strict anti-lightening system, prevent over
current and short-circuit.
·Al-Si-Mg alloy
high density cast and surface-passivated shell improves the shielding and
radiating capability of the optical node
·60VAC
independent power supply input port available, which equipped with fuses to
protect the burning out of misoperation
ITEM |
UNIT |
PARAMETER |
Receiving Optical Power |
dBm |
-9~+3 |
Return Loss |
dB |
>45 |
Optical Receiving Wavelength |
nm |
1290--1600 |
Optical Connector Type |
|
FC/APC, SC/APC optional |
Fiber Type |
|
Single module |
C/N |
dB |
≥51 |
C/CTB |
dB |
≥65 |
C/CSO |
dB |
≥60 |
Frequency Range |
MHz |
87—862/1000 |
Flatness |
dB |
±0.75 |
Output Return Loss |
dB |
≥16 |
Nominal Output Power Level |
dBμV |
110 |
Output Test Port Power Level |
dBμV |
-20 |
Output Number |
PCS |
4 |
Voltage |
VAC |
40—95/140-265 |
Operating Temperature |
℃ |
-40~60 |
Consumption |
W |
<65 |
Dimension(including head F) |
mm |
430(L)*245(W)*175 (H) |
Return optical transmission parameter could refer to “BTM32XX
series return optical transmission module”